Effect of cutting process on the stress corrosion susceptibility of AISI 304L stainless steel

During manufacturing of a component, cutting, turning, grinding, and milling operations are inevitable and these operations induce surface residual stresses. In this study, it is shown that, depending on the process employed for cutting, residual stresses generated at the cut surfaces can vary widely and they can, in turn, make the cut surfaces of austenitic stainless steel (SS) prone to stress corrosion cracking (SCC). An austenitic SS 304L plate was cut using three different procesess: bandsaw cutting, cutting using the cut-off wheel, and shearing. Surface residual stress measurement using the X-ray diffraction (XRD) technique is carried out close to the cutting edges and on the cross-section. SCC susceptibility studies were carried out as per ASTM G36 in 45% boiling magnesium chloride solution. Optical microscopic examination showed the presence of cracks, and confocal microscopy was used to measure the depth of cracks. The study confirmed that high tensile residual stresses present in the cut surfaces produced by cut-off wheel and shear cutting make the surfaces susceptible to SCC while the surfaces produced by bandsaw cutting are resistant to SCC. Hence, it is shown that there is a definite risk of SCC for product forms of austenitic SS with cut surfaces produced using cutting processes that generate high tensile residual stresses stored for a long period of time in a susceptible environment.     

Effect of intermetallics on susceptibility of Mg alloy welds to liquation cracking

ABSTRACT

The circular-patch welding test was used to study the liquation and liquation cracking of AZ-series Mg alloys. A heat treatment was carried out on the as-received AZ91 alloy to dissolve the γ(Mg₁₇Al₁₂) particles before welding. The circular-patch welding test was then conducted on the heat-treated, as-received AZ91 alloy using AZ61 and AZ91 filler wires. The results showed that the susceptibility of AZ91 alloy to liquation and liquation cracking was significantly reduced by the dissolution of massive γ(Mg₁₇Al₁₂) particles via a heat treatment before welding as the liquation mechanism was changed. Both constitutional liquation and incipient melting occurred in the partially melted zone of the as-received AZ91 welds, while only incipient melting occurred in the heat-treated AZ91 welds.     

某带钢连续热浸镀机组卧式连续退火炉水冷炉辊的开裂原因

采用宏观和微观形貌观察、化学成分分析、显微组织观察、硬度测试等方法,对某带钢连续热浸镀机组卧式连续退火炉水冷炉辊的开裂原因进行了分析。结果表明:水冷炉辊辊套成分中不含铌元素,镍元素含量偏低,导致组织中形成网状富铬碳化物析出相;辊套内腔结垢、水冷不畅使水冷炉辊产生局部过热,导致工作侧辊套基体中粒状合金碳化物的析出和网状富铬碳化物的长大,使工作侧辊套的脆性增加;随着结垢的沉积,水冷炉辊出现轴承转动不畅,甚至堵转现象;在热应力、扭力作用下,裂纹在网状富铬碳化物析出相中形成并沿网状碳化物逐渐向基体内扩展,最终导致水冷炉辊的开裂。     

On manifestation & physics of the Kurdjumov and spillover effects in carbon nanostructures,under intercalation of high density hydrogen

Abstract

Some experimental evidences and the physics (thermodynamics) of the nanoscale self-intercalation of high-density gaseous molecular hydrogen (ρ?≈?0.045?g/cm³, T?≈?300?K) into surface nanoclusters in highly oriented pyrolytic graphite and epitaxial graphene, as well as the nanoscale self-intercalation of high density solid molecular hydrogen (ρ?≈?0.5?g/cm³, T?≈?300?K, the compressed pressure ～ 0.5 Mbar) into graphite nanofibers are considered, with regard to the problem of compact and efficient hydrogen on-board storage and other clean energy applications. Perspectives of further developments of these results are considered, as well.     

High‐performance printable paper‐like composites derived from plastic flexible film wastes

Owing to lack of proper recycling methods, plastic flexible film wastes are usually directly discarded or incinerated, which brings about severe environmental pollution. Therefore, converting plastic wastes into value‐added products has received more and more attention in recent years. In this work, paper‐like composites derived from plastic flexible film wastes were prepared via the thermally induced phase separation method by adding polyethylene‐graft‐maleic anhydride (PE‐g‐MAH) as a compatibilizer and fumed silica as an additive. The resulting paper‐like composites were characterized by SEM and infrared spectroscopy. Other properties such as mechanical properties, thermal properties, whiteness, printability and adsorption performance were also tested in detail. It was found that remarkable enhancements in mechanical, thermal and printable properties of the paper‐like composites were obtained when nano‐SiO₂ loading was 2.5–3 wt%. Uniformly distributed holes that can endow good printability by providing space for ink or other functional molecules were observed by using SEM. Furthermore, the CIE whiteness value of the resulting composites can reach 91.6%–96.7% on adding nano‐SiO₂. Additionally, the paper‐like composites integrating nano‐SiO₂ and PE‐g‐MAH exhibited good solid ink affinity and high water or oil adsorption capacity. Thus, according to this research, high‐performance printable paper‐like composites used as major components of multifunctional papers can be prepared based on plastic flexible film wastes. © 2019 Society of Chemical Industry     

基于改进NSGA-Ⅱ算法的乙烯裂解炉操作优化

现有的乙烯裂解炉优化通常只针对两个目标函数即产物乙烯和丙烯的收率，并且采用遗传算法的收敛效果一般，故提出一种基于改进NSGA-Ⅱ算法来研究一个多目标运行的解决方案，以此来解决乙烯裂解炉的固定周期操作优化问题，即在增大产物乙烯和丙烯收率的同时减少原料以及蒸汽流量来提高整体运行状况。把具体问题量化为数学模型，分析了原料气烃比、原料流量、出口温度对乙烯和丙烯收率的影响。实验结果表明，相较于原有操作条件，提出的优化方案具有良好的可行性。     

电压对微弧氧化膜抑制7050铝合金氢脆敏感性的影响

为进一步探究微弧氧化膜和7050铝合金的氢脆敏感性之间的关系,采用了湿空气中的慢应变速率拉伸、拉伸断口形貌分析、微弧氧化试样表面形貌分析及氢含量测试等表征手段,验证了微弧氧化膜抑制7050铝合金在湿空气中发生氢脆的机制。结果表明,不同微弧氧化电压下制备的膜层对7050铝合金具有不同的抑制氢脆效果,抑制机制主要由膜阻氢进入试样和膜致附加压应力两个方面组成。     

Effect of Moving Speed of Charged Metallic Spherical Electrode on Electrostatic Discharge

In this investigation, the nature of the electrostatic discharge (ESD) that occurs when a charged object moves toward a stationary grounded object is experimentally clarified. The spark lengths, discharge currents, and induced voltages in a magnetic probe were measured when a charged metallic spherical electrode connected to a 422 pF capacitor approached a stationary grounded object, which was the current target, for different moving speeds of the charged metallic spherical electrode in a range of 1 mm/s to 100 mm/s. The charge voltages of the capacitor were +6.5 kV and +10 kV. Based on the results, the average gap length shortened with the speed of the spherical electrode. The average peak values of the discharge current and the induced voltage were likely to increase with the speed of the spherical electrode. The average rise times of the discharge current and the induced voltage were likely to drop with the speed of the spherical electrode. The relation between the spark length and the discharge current due to the ESD can be explained qualitatively by using an equation derived from the spark resistance formula proposed by Rompe and Weizel.     

Fatigue life improvement of 12Cr1МoV steel by irradiation with Zr+ ion beam

Cyclic tension and bend tests were performed on heat-resistant 12Cr1MoV steel specimens in as-supplied condition as well as after Zr⁺ ion beam surface irradiation. Distinct differences in strain induced relief, as well in cracking pattern of modified surface layer were observed by optical microscopy and interference profilometry. Changes in subsurface layer are characterized by means of nano- and microindentation and fractography of fracture surfaces (with the help of scanning electron microscopy). It is shown that the main influence on mechanical properties is mostly induced by thermal treatment during irradiation rather than formation of a 2 μm thick layer doped with Zr. The differences in deformation behavior may be explained by physical mesomechanics concepts.